Tag

yeşil hidrojen
As one of the metal GDL supplier for PEM hydrogen industry, our titanium fiber felt GDL has proved it’s quality after 2000+ hours test and successfully installed in the 0.5MW stack recently. If you are interested in our new product 1200mm*1200mm ti fiber felt GDL ,please feel free to contact us any time: [email protected]
Read More
The reason for the low efficiency of hydrogen transportation is that the density of hydrogen storage is too low. At present, various methods of hydrogen transmission are actually transporting stored hydrogen. If the hydrogen storage density increases, the efficiency of hydrogen delivery will naturally increase. Scientists now boldly imagine the co-transmission of hydrogen and electricity,...
Read More
In the proton exchange membrane fuel cell, the main function of the gas diffusion layer is to support the catalyst, and to provide a channel for the gas involved in the reaction and the water produced, and it is one of the key components of the membrane electrode. The gas diffusion layer is mainly used...
Read More
Titanium felt LGDL Performance comparison PEMEC tests were performed with 20ml/min flow rate of liquid water at the anode side and 80 degrees temperature; the performance and impedance results shows in Figure about titanium felt, respectively. Performance comparison curves between there different thickness ti felt LGDLs (square: 350 um thickness; circle: 500 um thickness; triangle:...
Read More
At present, hydrogen production mainly contains four processes and technologies:1. Electrolysis of water; 2. Fossil fuels; 3. Industrial by-products; 4. Biomass. Electrolysis of water can directly obtain fuel hydrogen without CO, but its high cost is not conducive to the widespread promotion of this technology. Although the cost of the three types of production technologies...
Read More
Sticky Post
Titanium fiber felt, a diffusion layer material, provides electrons between the catalyst layer and the bipolar plate or the current distributor on the anode side. Due to its three-dimensional network porous structure, high porosity, high corrosion resistance and other characteristics, titanium felt has become one of the best materials of diffusion layer in fuel cell...
Read More
As the global resource shortage is becoming more and more serious. In terms of new energy, especially the process of producing hydrogen from electrolyzed water. Many customers demand metal fiber felts with a thickness of 200-240 microns and a porosity of 70%. Titanium felt is essential for Electrolysis hydrogen production equipment. Due to the high...
Read More
A new material titanium felt with a diameter of micrometers. It is made of metal titanium fiber by laying and sintering at high temperature. Titanium fiber felt has a three-dimensional network porous structure. Porosity and hole diameter are adjustable. Finally, it will obtain the best electrolytic performance during the electrolysis process. In the process of...
Read More
At the present time, in the PEMEC, titanium felt liquid/gas diffusion layer (LGDL) is located between the catalyst layer (CL) and current collecting layer with flow field. As for the purpose of the Titanium felt LGDL, is to transport electrons, heat, and reactants/products to and from the CL with minimal current, thermal, and fluidic losses....
Read More
tr_TRTürkçe