Analyzing the cost of electrolytic water for hydrogen production

Proton exchange membrane electrolyzer (PEM) hydrogen production cost analysis Alkaline electrolyzer has low electrolytic efficiency, requires the use of strong caustic alkali, requires the removal of water and alkali from the hydrogen. That is difficult to start and change the load quickly, and cannot adjust the speed of hydrogen production quickly. So it is poorly

Read More »

German-Australian joint hydrogen energy project launched

On March 10, the Australian and German governments jointly launched the HyGATE program, a hydrogen innovation and technology incubation program. It aims to promote cooperation between Australia and Germany to set up a hydrogen energy value chain between the two countries. Then they will find pilot, test and demonstration projects along the hydrogen supply chain.

Read More »

Green Hydrogen Preparation: Catalyst Innovation

Efficient catalysts appear to be important for green hydrogen preparation, chemical industry, fertilizer production and other economic sectors. In addition to the use of transition metals, various other metallic or non-metallic elements have now become the focus of research. Green hydrogen is an important component in a climate-neutral energy system. It is produced by electrolytically

Read More »

How to improve the efficiency of hydrogen transmission

The reason for the low efficiency of hydrogen transportation is that the density of hydrogen storage is too low. At present, various methods of hydrogen transmission are actually transporting stored hydrogen. If the hydrogen storage density increases, the efficiency of hydrogen delivery will naturally increase. Scientists now boldly imagine the co-transmission of hydrogen and electricity,

Read More »

Solid hydrogen transportation

Solid hydrogen transportation, it is relatively simple to use hydrogen storage materials to store and transport hydrogen, that is, use hydrogen storage alloys to store hydrogen, and then transport containers containing hydrogen storage alloys. Solid hydrogen has the following advantages:(1) The volumetric hydrogen storage density is high; (2) The working conditions of the container are

Read More »

Gaseous hydrogen transportation

Hydrogen transportation is an important part of hydrogen energy utilization. Generally speaking, there will be a certain distance between hydrogen production plants and users, which requires hydrogen transportation. Based on the different state of hydrogen during transportation, it can be divided into gas hydrogen transportation, liquid hydrogen transportation and solid hydrogen transportation. The first two

Read More »

Gas diffusion layer material

In the proton exchange membrane fuel cell, the main function of the gas diffusion layer is to support the catalyst, and to provide a channel for the gas involved in the reaction and the water produced, and it is one of the key components of the membrane electrode. The gas diffusion layer is mainly used

Read More »

Characteristics of different thickness of titanium felt LGDL

PEMEC tests were performed with 20ml/min flow rate of liquid water at the anode side and 80 degrees temperature; the performance and impedance results shows in Figure about titanium felt, respectively. With the further research, among three different thickness titanium LGDLs in Figure. It shows that the PEMEC with a 350 micron thickness titanium LGDL

Read More »

Surface Treatments of Titanium Felt LGDL

Titanium Felt LGDL: titanium felt liquid gas diffusion layerLGDL: liquid gas diffusion layerCL: catalyst layer To reduce the interfacial resistivity between the LGDL and CL. There are two different surface treatments: sputter coating and thermal nitriding. Firstly, as shown in Figure 1, sputter coating is a physical vapor deposition (PVD) method of thin film deposition

Read More »