Tag

feltro di titanio
As one of the metal GDL supplier for PEM hydrogen industry, our titanium fiber felt GDL has proved it’s quality after 2000+ hours test and successfully installed in the 0.5MW stack recently. If you are interested in our new product 1200mm*1200mm ti fiber felt GDL ,please feel free to contact us any time: [email protected]
Per saperne di più
Hydrogen transportation is an important part of hydrogen energy utilization. Generally speaking, there will be a certain distance between hydrogen production plants and users, which requires hydrogen transportation. Based on the different state of hydrogen during transportation, it can be divided into gas hydrogen transportation, liquid hydrogen transportation and solid hydrogen transportation. The first two...
Per saperne di più
At present, there are four main paths for global hydrogen storage: High-pressure gaseous hydrogen storage technology, low-temperature liquid hydrogen storage technology, solid-state hydrogen storage technology and organic liquid hydrogen storage technology The mainstream of development in China’s hydrogen storage industry is high-pressure gaseous hydrogen storage, and most hydrogen refueling stations use high-pressure hydrogen storage. High-pressure...
Per saperne di più
Membrane electrode assembly, also known as membrane electrode, is the key core component of fuel cell power generation, which is composed of gas diffusion layer, catalyst layer and proton exchange membrane. membrane electrode Principle Hydrogen reaches the anode through the gas flow field on the anode plate, reaches the anode catalyst layer through the diffusion...
Per saperne di più
Fuel cell is a kind of power generation device, but it is not like a normal non-rechargeable battery and discarded when used up, nor is it like a rechargeable battery. To maintain its electricity, the fuel required is “hydrogen”, and this is why it is classified as a new energy source. Principle of fuel cells...
Per saperne di più
In the proton exchange membrane fuel cell, the main function of the gas diffusion layer is to support the catalyst, and to provide a channel for the gas involved in the reaction and the water produced, and it is one of the key components of the membrane electrode. The gas diffusion layer is mainly used...
Per saperne di più
Titanium felt LGDL Performance comparison PEMEC tests were performed with 20ml/min flow rate of liquid water at the anode side and 80 degrees temperature; the performance and impedance results shows in Figure about titanium felt, respectively. Performance comparison curves between there different thickness ti felt LGDLs (square: 350 um thickness; circle: 500 um thickness; triangle:...
Per saperne di più
Titanium Felt LGDL: titanium felt liquid gas diffusion layerLGDL: liquid gas diffusion layerCL: catalyst layer To reduce the interfacial resistivity between the LGDL and CL. There are two different surface treatments: sputter coating and thermal nitriding. Sputter Coating Firstly, as shown in Figure 1, sputter coating is a physical vapor deposition (PVD) method of thin...
Per saperne di più
At present, hydrogen production mainly contains four processes and technologies:1. Electrolysis of water; 2. Fossil fuels; 3. Industrial by-products; 4. Biomass. Electrolysis of water can directly obtain fuel hydrogen without CO, but its high cost is not conducive to the widespread promotion of this technology. Although the cost of the three types of production technologies...
Per saperne di più
Sticky Post
Titanium fiber felt, a diffusion layer material, provides electrons between the catalyst layer and the bipolar plate or the current distributor on the anode side. Due to its three-dimensional network porous structure, high porosity, high corrosion resistance and other characteristics, titanium felt has become one of the best materials of diffusion layer in fuel cell...
Per saperne di più
1 2
it_ITItaliano