Etiqueta

pila de combustible
Fuel cell is a kind of power generation device, but it is not like a normal non-rechargeable battery and discarded when used up, nor is it like a rechargeable battery. To maintain its electricity, the fuel required is “hydrogen”, and this is why it is classified as a new energy source. Principle of fuel cells...
Leer más
In the proton exchange membrane fuel cell, the main function of the gas diffusion layer is to support the catalyst, and to provide a channel for the gas involved in the reaction and the water produced, and it is one of the key components of the membrane electrode. The gas diffusion layer is mainly used...
Leer más
Titanium felt LGDL Performance comparison PEMEC tests were performed with 20ml/min flow rate of liquid water at the anode side and 80 degrees temperature; the performance and impedance results shows in Figure about titanium felt, respectively. Performance comparison curves between there different thickness ti felt LGDLs (square: 350 um thickness; circle: 500 um thickness; triangle:...
Leer más
At present, hydrogen production mainly contains four processes and technologies:1. Electrolysis of water; 2. Fossil fuels; 3. Industrial by-products; 4. Biomass. Electrolysis of water can directly obtain fuel hydrogen without CO, but its high cost is not conducive to the widespread promotion of this technology. Although the cost of the three types of production technologies...
Leer más
As the global resource shortage is becoming more and more serious. In terms of new energy, especially the process of producing hydrogen from electrolyzed water. Many customers demand metal fiber felts with a thickness of 200-240 microns and a porosity of 70%. Titanium felt is essential for Electrolysis hydrogen production equipment. Due to the high...
Leer más
Un nuevo material de fieltro de titanio con un diámetro de micrómetros. Está hecho de fibra metálica de titanio mediante su colocación y sinterización a alta temperatura. El fieltro de fibra de titanio tiene una estructura porosa de red tridimensional. La porosidad y el diámetro de los agujeros son ajustables. Finalmente, obtendrá el mejor rendimiento electrolítico durante el proceso de electrólisis. En el proceso de...
Leer más
En la actualidad, en el PEMEC, la capa de difusión de líquido/gas de fieltro de titanio (LGDL) se encuentra entre la capa de catalizador (CL) y la capa de recogida de corriente con campo de flujo. En cuanto al propósito de la LGDL de fieltro de titanio, es transportar electrones, calor y reactivos/productos hacia y desde la CL con mínimas pérdidas de corriente, térmicas y fluídicas....
Leer más
es_ESEspañol