Titanium Fiber Felt for PEM& AEM Electrolysis stack and Fuel cell LGDL 

Titanium Fiber Felt for PEM Electrolysis stack and Fuel cell LGDL

شعرت ألياف التيتانيوم is suitable for LGDL (liquid/gas diffusion layer) in hydrogen production and Fuel cell stack.

As a highly promising material for a PEM electrolyzer, شعرت ألياف التيتانيوم provides high thermal/ electrical conductivities and excellent mechanical properties. For example, high corrosion resistance at high positive overpotential, even in highly acidic and humid conditions.

Carbon based materials, are typically used in LGDL of PEMFCs. Such as graphite bipolar plates, carbon paper, and carbon cloth. While, they are unsuitable in the anode of LGDL, due to the high anodic potential that occurs during electrolysis operation as they will create a highly oxidative environment, which corrodes the carbon and results in poor interfacial contacts. Then, the efficiency of the cell will decrease. In order to resolve this issue, materials (titanium felt) with a high corrosion resistance are required.

المواد: التيتانيوم
الحجم: ≤1500 * 1200 مم

Fiber size: 20 micron -40 micron
السماكة: 0.20 مم ، 0.25 مم ، 0.40 مم ، 0.60 مم
المسامية: 60٪ - 75٪

※ يمكن تخصيص المسامية والحجم.

• Three-dimensional grid porous structure and Strong corrosion resistance
• Optimal electrolysis performance or Uniform pore size distribution
• High porosity and current density
• Pore Graded Felt Available

• شعر التيتانيوم for Liquid/ Gas diffusion layer (LGDL)
• Hydrogen absorber and Hydrogen-rich water dispenser
• Diffusion layer of hydrogen fuel cell stack
• Hydrogen production by PEM water electrolysis

أداء المحلل الكهربائي بسمك LGDL مختلف

أداء المحلل الكهربائي مع مسامية مختلفة من الأنود LGDL

أداء ركائز مختلفة

Electrical performance of our Titanium felt LGDL

اتصل بفريق المبيعات لمزيد من المعلومات

Email: [email protected] Phone: +86-186 5753 6277

Raytron is a group of companies specialized in developing material for New Energy Industries such as Photovotalic ribbon for Solar Panel, Battery tab for Lithium battery, شعرت ألياف التيتانيوم for Hydrogen industry, stainless steel fiber, stainless steel fiber felt disk for production of PEM & AEM and Lithium Battery Separator Film Filtration, etc.
With its production site in China and two sales office for EU and American market, Raytron is offering Non-ferrous metal based materials for clients from more than 20 countries.